Premium Beer Kegerator Conversion Kit – 1 Faucet
Total Cost: $0.00
Convert that old refrigerator into a draft beer dispenser with our handy beer kegerator conversion kit. When you want to build the best beer dispensing system possible for your home or office, look no further than this complete kegerator conversion kit. With an extra refrigerator, some basic hand tools, and this kegerator kit, you can enjoy draft beer at home anytime. Learn how to set up your system in minutes with this simple homemade kegerator guide!
This DIY kegerator kit contains all the hardware and equipment you need to pour from 1 faucet. Our best door conversion kit! Premium drip tray with stainless steel backsplash, dual gauge regulator, and cleaning kit.
FEATURES
- Enjoy fresh, cold draft beer at home by converting an existing refrigerator into a kegerator.
THIS KEGERATOR CONVERSION KIT INCLUDES
- Dual gauge CO2 regulator that features a solid forged brass body, wire mesh inlet filter, quad-ring inlet seal, built-in pressure relief valve, 0-60 and 0-3000 PSI gauges, and a 3/8" O.D. outlet barb with shutoff.
- 4’ of red vinyl gas hose with re-useable snap clamps.
- D System keg coupler that features a stainless steel body, a stainless steel handle fork, a tin-nickel alloy plated probe, a short lever handle, a built-in pressure relief valve, and check valves for both the gas-in and liquid-out ports.
- 5’ long vinyl beer hose assembly. This brewery-approved hose will not rot, swell, or dry out and is unaffected by normal beer line cleaning chemicals. Pre-assembled with a hex nut and neoprene washer on one end for connecting to keg coupler.
- 4" long PVC door spacer that allows secure shank installation without crushing the refrigerator door insulation.
- 5-1/8" long nipple shank assembly. The one-piece construction prevents leaks, and the barbed fitting allows easy connection of the beer line assembly. Includes shank, forged brass locknut, plastic flange, coupling nut, sleeve, and snap ring.
- Premium quality chrome plated solid brass beer faucet. Features a chrome-plated forged brass body, a PTFE lever washer for smooth consistent performance and easy operation, a solid brass faucet lever, and a chrome-plated bonnet, shaft, and collar.
- High gloss black plastic faucet knob.
- Faucet wrench for easy tightening the faucet to the shank.
- Premium shank-mounted 6" x 6" stainless steel drip tray with 11" tall backsplash and a 1-3/4" x 3/4" N.P.T. drain pipe, drain nipple, 6' of vinyl drain hose, and a 1-quart plastic drain bottle with lid.
- The cleaning kit includes a 1-quart shatterproof plastic cleaning bottle with a low profile hand pump and a Solid brass faucet cleaning attachment, 1 pound tub of CleanFlo powder cleaner, and a faucet cleaning brush.
- Complete, detailed easy-to-follow instructions for quick installation.
NOTE: Most domestic draft beer is not pasteurized, so it must be kept cold. The temperature must be maintained between 36-38° F, and the temperature must be maintained all the way to the faucet. Temperatures above 38° F will cause foam and promote sour/cloudy beer. If the temperature rises above 50-55° F, bacteria growth rapidly begins to spoil the flavor and cloud the beer. Simply put, keg beer storage can be compared to milk storage: "If it is not kept cold, it will spoil."
This is a Clearance Product. Clearance Products cannot be returned for credit or exchange. Prices shown are the final price, no other discounts will be applied.