Articles

Keg Tap Information

The new "single valve" keg couplers are simple and easy to use. Attach coupler to keg, depress handle to engage, pressure is allowed to enter the keg and beer is pushed out. Most couplers have a built-in PRV (pressure relief valve) to allow over-pressurized (55 PSI) gas to escape before it enters the keg.

How many kegs of draft beer can be dispensed out of a CO2 tank?

As a general rule of thumb, it takes about a ½ Lb of CO2 to dispense ...

Do I need to clean the equipment and how often?

The simple process of cleaning your draft beer system takes only a few minutes ...

Temperature: What temperature do I need to store draft beer at?

Almost all draft beer problems are temperature related

What are some common troubleshooting issues?

Almost all dispensing problems are the result of: temperature, pressure and cleaning...

What is "Beerstone"?

Beerstone is a form of calcium buildup that occurs with dispensing of draft beer.

Pressure: What pressure do I need to set the CO2 beer regulator at?

What pressure do I set the CO2 beer regulator at? When dispensing keg draft beer, the goal is to keep the CO2 level prescribed by the brewer.
  • Page 1 of 7