31-1/2" Stainless Steel Glass Rinser Drain Tray, 3-5 Faucets

Product Images

31-1/2" Glass Rinser Tray

Description

The new standard in integrated bar design combines the draft tower mounted to a platform tray. A seamless stainless steel platform tray offers improved hygiene and efficiency at the point of dispense. The tray is constructed of heavy gauge stainless steel with a durable metal rinser.

Condition the Glass Before Dispensing

  • Rinse away any impurities that might be in the glass.
  • Chill the glass utilizing cold water.
  • A wetted glass pours better.

Rinser Water Inlet Installation

  • Always check local plumbing codes first.
  • Install in-line water regulator set at 15 PSI from the street water supply (no greater, perfect operating pressure).
  • Install in-line one way check valve from the street water supply (prevents pressure drop which can cause leaking).
  • Install in-line shut-off for the rinser system from the street water supply (this must be turned off nightly).
  • If teed into soda system make sure system can handle the increased water demand. Have plumber install a 45° 1/2" O.D. barb for the drains if line is not hard plumbed into the system.
  • Install a shut-off for the water supply if line is not hard plumbed into the system.
Choose stainless steel for the ultimate in purity!

Specifications

Dimensions31-1/2"L x 15-3/4"W
Drip Area28-3/4"L x 7-1/4"W
Tower Mount Area29-1/2"L x 6"W
Faucets3-5
Series TypeSurface Mount
MaterialStainless Steel
Water Drain1/2" Barb
Water connectionExternal-1/2' BSP (standard plumbing connection)
Customer Reviews

Average Rating:


Product Quality
Ease of Use
Cost-Benefit
Customer Service
Overall
Great product
By Carrey from Fort Wayne, IN on Tuesday, November 6, 2012
2 out of 2 found this review helpful
Have installed multiples of these trays in various sizes. Well made and make the draft or other installation look very finished and professional. Glass rinser works perfectly. The rinsers will NOT stick as mentioned in other reviews IF they are installed according to the manufacturers instructions (pressure limiter, shut off valve nearby to allow easy occasional cleaning of the sprayer parts). My only complaint would be they have recently went from an all metal threaded drain piece to a plastic piece. I will be calling micromatic to request that the metal part is provided on subsequent orders.

Was this review helpful to you?





Product Quality
Ease of Use
Cost-Benefit
Customer Service
Overall
By Larry De Marchi from CES Foods, Inc. Columbus, WI. on Saturday, January 5, 2008
1 out of 1 found this review helpful
great tray. finally a tray that can mount beer or soda towers and create a "finished" job look. NO MESS MOUNTING TOWER SEPATATE FROM DRIP TRAY !!!! would like to see a similar tray without the rinser hole in the drain for soda usage.

Was this review helpful to you?





Product Quality
Ease of Use
Cost-Benefit
Customer Service
Overall
Overall fine product
By Chas from Wisconsin on Tuesday, August 30, 2011
0 out of 1 found this review helpful
Excellent upgrade for both the guest and establishment. Rinser tends to eventually stick causing an annoying, messy, water spray problem. Rinser was replaced at no charge the first time the issue arose, told it shouldn't happen. Now it's happening again-twice within 14 months. Disappointing, but an absolute winner when all works correctly. (Long term concerns)

Was this review helpful to you?



Replacement Parts
ItemPart #DescriptionPriceAvail.Qty 
1 GR-1581-2 Glass Rinser - Replacement $78.30 In Stock