Remote or long draw glycol-cooled systems are designed to deliver cold draft beer at the same temperature as the walk-in-cooler over long distances using a glycol power pack. The power pack is at the heart of the system, as it maintains the temperature of the beer by circulating propylene glycol, a non-toxic, food-grade antifreeze mixture, alongside the beer lines all the to the faucet.

Micro Matic is committed to producing the industry’s most efficient and reliable glycol power packs in the industry. Our cooling technology is the perfect fit for your establishment. Micro Matic Pro-Line™ Power Packs are engineered by draft beer industry experts with the installer/operator in mind. The large glycol bath and superior insulation properties allow the compressor to cycle less frequently and ensure the maximum life-cycle of the power pack, reducing service calls and downtime of your beer system. Our expansive portfolio of power packs can be found in local bars and restaurants to some of the highest volume accounts in the world.

Why Choose a Remote Power Pack?

The walk-in cooler and power pack are usually located in one of the hottest areas - the kitchen. The higher ambient temperature in the kitchen area puts additional demand on the glycol chiller to work properly and maintain temperature. Utilizing a remote (split deck) power pack enables you to place the compressor in a cooler location where it can get proper ventilation - either inside or outside the building. The glycol bath is then located near the walk-in cooler where the beer kegs are. The refrigeration deck is a sealed system that can be located anywhere, including outdoors. The 11.5 gallon glycol bath includes at least one Procon pump to circulate the cold glycol alongside the beer lines in the trunk housing. Depending on the model, up to three additional Procon pumps and motors are available.

FEATURES

Sight Glass for Bath Level – Verify glycol level without removing the lid.
Digital Thermostat – The adjustable digital thermostat provides an accurate glycol temperature display for ease of readability.
Pumps – Industry-standard rotary vane pumps are ultra-reliable and easily serviced, reducing replacement and downtime.
Thermally-efficient Bath – Engineered with a large capacity bath and expanded foam in the walls and floors, our units run less, saving energy and extending the compressor life.
Lift-Off Deck Lid – A completely assembled upper deck ensures easy serviceability and reliable performance.

Specially designed to accommodate long draw beer systems, this remote glycol power pack features: 5,100 BTU, 3/4 HP air-cooled compressor, 11.5 gallon glycol bath, and three pumps for glycol re-circulation.

*Units manufactured prior to 2/1/2022 were produced with a 6-15P plug. Power pack series models (MMPP4301, MMPP4302, MMPP4303 and MMPP4305) manufactured after 3/1/2023 use R513a refrigerant.

INSTALLATION TIPS: Prior to installing a remote/split deck glycol power pack, it is imperative to determine the method of connecting to the electrical service. Ensure the electrical service to power these systems will handle the load requirements. See the product specifications or ID plate on the equipment for electrical load requirements. It is recommended that all electrical services be performed by a certified electrician.

WARRANTY: All power packs carry a full 18 month warranty against defects in material and workmanship and one year on labor from the date of sale. Defective parts, subject to our inspection, will be replaced or repaired during the warranty period on a no charge basis. The compressor is warrantied for an additional three and one-half (3-1/2) years. All loss of sales must be borne by the purchaser.

NOTE: All remote power packs are made to order. Please allow 4-12 week lead time.

Need help choosing the right power pack for your space? Select the most efficient unit by using our BTU Calculator