Kronos - 8 304 Faucet Draft Tower, Glycol, Wall Mount w/ Glass Rinser

Kronos - 8 Faucet Draft Tower

Description

Save space and serve cold beer with our new wall mount draft tower – Kronos! The brushed stainless steel finish with polished stainless steel faucets provide an eye-catching, hygienic stage for "What's on tap!" The drain is hidden behind a brushed stainless steel skirt for a clean appearance.

Installation Suggestions with Kronos

  • Direct Draw – Through the Wall Dispensing. Beer will warm up in the wall space between the interior of the walk-in cooler and the exterior. Guarantee your first pour is cold by utilizing a power pack to circulate cold glycol around the shanks at the point of dispense.
  • Long Draw – Remote Dispensing. If there is limited space on the bartop or even the back bar consider the Kronos wall mount dispenser
  • View Kronos Dimensions 

Perfect for Modular Multi-Faucet Installations

Kronos makes for excellent modular multi-faucet installations. For example: combine two 10 faucet Kronos for a show stopping 20 faucet draft beer station. Simply plumb the glycol from one station to the other and tie the plumbing together behind the hidden skirt.

Rinser Water Inlet Installation:

  • Always check local plumbing codes first.
  • Install in-line water regulator set at 15 PSI from the street water supply.
  • Install a shutoff rinser on the water supply.

NOTE: It is recommended a licensed plumber connect the glass rinser to the water supply line. Always use an in-line shut-off and water pressure regulator. Micro Matic shall not be held liable for damage caused by improper installation.

  • View Water inlet Components 

  • Important information regarding Prop. 65 for CA residents.
    Choose stainless steel for the ultimate in purity!Kool-Rite Technology included.NSF Certified

    Specifications

    Model TypeWall Mount Draft Tower
    Dispense SystemGlycol Cooled (Kool-Rite integrated module)
    Faucets8 - 304 Stainless Steel (Knobs not included, order seperately)
    Faucet Spacing3" center to center
    Connection (Product)1/4" O.D. Stainless Steel tubes with tapered barb 1/4"-3/8"
    Connection (Glycol)3/8" O.D. Copper tubes with 3/8" barb fitting
    Back Plate Dimensions24" Wide x 17-1/4" High
    Integrated Glass Rinser Drip Tray24" Wide x 9-1/2" Deep
    Customer Reviews







    Replacement Parts
    ItemPart #DescriptionPriceAvail.Qty 
    1 GR-1581 Glass Rinser - Replacement $68.85 In Stock
    arrow_upward