Splicers & Unions

OVERVIEW

Splicers are required to join two hoses of the same I.D. (inside diameter) or to make a transition from a larger I.D. to a smaller I.D. Match a splicer size to the I.D. hoses to be used.

Straight

The most common splicer, straight, is offered in the most configurations. All Micro Matic straight spilcers are stainless steel to ensure the best in beer purity.

Elbow & U Bends

A stainless steel elbow or U bend produces an unhindered liquid flow opposed to a kinked line. All Micro Matic elbows and U bends are stainless steel to ensure the best in beer purity. Also applied to glycol and pressure flow connections.

Cross

Normally utilized for home dispensing. Liquid flows into one leg of the cross, and then out in three directions. All Micro Matic cross fittings are stainless steel to ensure the best in beer purity. Also applied to pressure flow connections.

Inline “T” & “Y”

Inline “T” or “Y” is ideal for dividing beer from the keg cooler or for pressure flow in two directions. A “T” for pressure flow is available in brass, stainless steel or metal.

If you don't see what you're looking for, or not sure how to use or choose the right splicer or union, please give us a call at (866) 291-5756 or send us an email at sales@micromatic.com.

Our goal is your draft beer enjoyment!