Pro-Line™ Power Pack - 11,500 BTU - 1 1/2 HP - 2 Pumps - Water Cooled
Quantity
Total Cost: $0.00

The Micro Matic MMPP4307-PKG-WC Pro-Line™ Power Pack is designed for long-draw draft beer systems that use glycol recirculation to help maintain beer temperature between the cooler and dispensing faucets.
This self-contained unit combines 11,500 BTU cooling capacity, a 1 1/2 HP water-cooled compressor, an 11.5-gallon glycol bath, and two recirculation pumps. Its water-cooled configuration is designed for installations where high temperatures or humidity may make water-cooled refrigeration appropriate.
Pro-Line™ Water-Cooled Power Pack Features
- 11,500 BTU cooling capacity – Provides refrigeration capacity for appropriately sized glycol-cooled draft systems.
- 1 1/2 HP water-cooled compressor – Uses water-cooled refrigeration rather than the air-cooled configuration available in other models.
- Two rotary-vane recirculation pumps – Circulate glycol through the cooling system. The product specifications list an 80 GPH pump capacity.
- 11.5-gallon insulated glycol bath – Holds the glycol solution, with insulation in the bath walls and floor.
- Bath-level sight glass – Allows users to check the glycol level without removing the lid.
- Adjustable digital thermostat – Displays glycol temperature and allows temperature adjustments.
- Lift-off deck lid – Provides access for inspection and servicing.
Electrical and Water-Cooling Requirements
The MMPP4307-PKG-WC is listed as a self-contained, 208/230V unit with a NEMA 6-20P plug.
The water-cooled compressor requires suitable condenser-water connections and operating conditions. Check the current manufacturer specification sheet and installation manual for the required water supply, inlet temperature, pressure drop, drainage, electrical connections, and installation clearances.
Do not use the listed technical values as standalone operating instructions without checking the complete manufacturer documentation.
Comparing Pro-Line™ Glycol Power Packs
For another water-cooled option, compare the MMPP4307-PKG-3-WC three-pump power pack. It offers the same listed 11,500 BTU cooling capacity with three glycol-recirculation pumps instead of two.
For an air-cooled alternative, consider the MMPP4307-PKG two-pump power pack.
These models have different cooling methods and pump configurations. Compare the available condenser-water supply, installation environment, circulation requirements, and electrical specifications before selecting a power pack.
Glycol Preparation, Refrigerant, and Warranty
Follow the current Micro Matic installation manual for preparing and maintaining the glycol solution. Use the manufacturer's approved glycol mixture and water requirements for the specific unit.
Micro Matic identifies R448a refrigerant for MMPP4307-series power packs manufactured after January 1, 2023. Confirm the unit's production date and nameplate before refrigeration servicing.
The manufacturer provides warranty coverage for power-pack components, labor, and the compressor, subject to applicable terms and conditions. Refer to the current warranty documentation for coverage details.
Choosing the Right Glycol Power Pack
Power-pack selection depends on the system's calculated cooling load, trunkline arrangement, glycol circulation requirements, ambient conditions, and installation setup.
Use the Micro Matic BTU Calculator to assess cooling requirements, or explore the Power Packs category for other configurations.









