DRIP TRAY FINISHES
Not all finishes are available in all styles. Most of our drip trays are constructed of durable stainless steel for lasting value.
Fine graining is scored into the metal creating a matte finish.
The metal is highly polished to a chrome-like finish. This durable finish will not chip or pit like chrome. Easy cleaning, just spray with glass cleaner and wipe!
A base of stainless steel is highly polished to a chrome-like finish and then a brass color coating is electronically applied. PVD coating is scratch and tarnish resistant for years of beautiful service. No need to polish like brass, simply spray with glass cleaner and wipe.
DRIP TRAY STYLES
Surface mount drip trays are the easiest to install. Only one hole is required through the countertop for the drain line. The drip tray is secured with a nut and washer attached to the drain pipe.
The cut-out series is named for its design of following the flange of the tower. The advantage of this style is better drip coverage for the faucets. Only one hole is required through the countertop for the drain line. The drip tray is secured with a nut and washer attached to the drain pipe.
Recessed trays provide a clutter free presentation for the bar top. The disadvantage is in installing, a large rectangle needs to be cut into the counter top. The tray is secured to the counter with silicon sealant.
The bevel edge drip tray adds a designer touch to the bar top. The edges of the tray are slanted at a 45° angle creating highlights near the tower.
Wall mount drip trays are an excellent choice for outside of a walk-in cooler. Shanks with faucets are mounted through the drip tray directly into the walk-in. We offer a variety of pre-drilled shank holes for an easy installation. A threaded drain is included for easy PVC plumbing connections.
Add some dispense excitement to pouring! Simply invert beer glass and push down on built-in sprayer. Cold water is rinsed over the inside of the glass. A wetted glass makes pouring the perfect glass of draught beer easier. Trays are constructed of heavy gauge stainless steel with a durable plastic rinser. Cold water connection required.
The Wrap Around mounts under the tower and cantilevers over the bar edge. A threaded drain is included.
Replacement drains, drain extensions, and hose adapters.
If you don't see what you're looking for, or not sure how to choose the right drip tray to match your tower or installation, please give us a call at (866) 291-5756 or send us an email at sales@micromatic.com.
Our goal is your draft beer enjoyment!