|
Premium - Door Refrigerator Kegerator Kit, 2 Keg (Less Cylinder)
| Kegerator Conversion Kit Features:
|
|
Enjoy having your choice of 2 beers On Tap! |
| Gas Cylinder | Not Included - order seperatly |
| Regulator | Dual Gauge CO2 with Dual shut-offs |
| Keg Couplers | Two (2) - D System for North American Beers |
| Drip Tray | Stainless Steel 8" x 6 3/4" x 14" high backsplash with 2 holes |
| Cleaning Kit | 1 Qt Cleaning Bottle with faucet attachment, faucet wrench, brush, 4 oz line cleaner |
| Included | 2 Chrome faucets, 2 Faucet knobs, 2 Shanks, 2 Door spacers, 2 Sets of Hoses with fittings, Instructions |
Kegerator Conversion Kit Includes:
- Dual gauge CO2 regulator with dual outlets that features a solid forged brass body, wire mesh inlet filter, quad-ring inlet seal, built in pressure relief valve, 0-60 and 0-3000 PSI gauges, with 3/8" O.D. outlet barbs with shutoffs.
- Two lengths of 4’ of red Thermoplastic super vinyl gas hose with re-useable snap clamps.
- Two American Sankey "D" system keg couplers that features a stainless steel body, a stainless steel handle fork, a tin-nickel alloy plated probe, a short lever handle, a built in pressure relief valve, and check valves for both the gas-in and liquid-out ports.
- Two 5’ long super vinyl beer hose assemblies. This brewery approved hose will not rot, swell, or dry out and is unaffected by normal beer line cleaning chemicals. Pre-assembled with hex nut and neoprene washer on one end for connecting to keg coupler.
- Two 4" long PVC door spacers that allows secure shank installation without crushing the refrigerator door insulation.
- Two 4 1/2" long nipple shank assemblies. The one-piece construction prevents leaks, and the barbed fitting allows easy connection of the beer line assembly. Includes shank, forged brass locknut, plastic flange, coupling nut, sleeve, and snap ring.
- Two premium quality chrome plated solid brass beer faucets. Features a chrome plated forged brass body, a Teflon lever washer for smooth consistent performance and easy operation, a solid brass faucet lever, and a chrome plated bonnet, shaft, and collar.
- Two high gloss black plastic faucet knobs.
- Faucet wrench for easy tightening the faucet to the shank.
- Premium shank mounted 8" x 6 3/8" stainless steel drip tray with 14" tall backsplash and a 1 3/4" x 3/4" N.P.T. drain pipe, Drain nipple, 6' of vinyl drain hose, and a 1 quart plastic drain bottle with lid.
- Cleaning kit that includes a 1 Quart shatter proof plastic cleaning bottle with a Low profile hand pump and a Solid brass faucet cleaning attachment, 4 oz. bottle of cleaning solution, and Faucet cleaning brush.
- Patented SmartStrip Beer Volume and Temperature Monitor for accurate reading of beer keg remaining contents & temperature using thermometric technology.
- Complete, detailed easy to follow instructions for quick installation.
Notes:
Most domestic draft beer is not pasteurized, so it must be kept cold. The temperature must be maintained between 36-38°F, and the temperature must be maintained all the way to the faucet. Temperatures above 38°F will cause foam and promote sour/cloudy beer. If the temperature rises above 50-55°F, bacteria growth rapidly begins to spoil flavor and cloud the beer. Simply put, keg beer storage can be compared to milk storage: "If it is not kept cold, it will spoil."
|
Toll Free Orders:
1 (866) 291-5756
View Cart
|
Shipping Locations
