51" Stainless Steel Glass Rinser Drain Tray, 8-12 Faucets

51" Stainless Steel Glass Rinser Drain Tray, 8-12 Faucets

• Rinse away any impurities that might be in the glass.
• Chill the glass utilizing cold water.
• A wetted glass pours better.

Rinser Water Inlet Installation:

• Always check local plumbing codes first.
• Install in-line water regulator set at 30 PSI from the street water supply (no greater, perfect operating pressure).
• Install in-line one way check valve from the street water supply (prevents pressure drop which can cause leaking).
• Install in-line shut-off for the rinser system from the street water supply (this must be turned off nightly).
• If teed into soda system make sure system can handle the increased water demand. Have plumber install a 45° 1/2" O.D. barb for the drains if line is not hard plumbed into the system.
• Install a shut-off for the water supply if line is not hard plumbed into the system.
  
  

  Product Specification Sheet  Product Specifications Sheet (PDF 259k) 06-2008

  
  
  Specifications:

  Dimensions	51"L x 21-5/8"W
  Drip Area	47"L x 9"W
  Tower Mount Area	49"L x 9-1/2"W
  Faucets	8-12
  Series Type	Surface Mount
  Material	Stainless Steel
  Threaded Drain	3/4"
  Water Inlet	1/2" Barb