Tweet
I am thinking of adding a small fan to the POS Avanti. Can I use the same pigtail that I used to hook up to the blower for the fan? One pigtail for two "appliances"?
-
AVANTI BD6000 MOD's
MicroMatic Tower with Faucet
MicroMatic Stainless Faucet
Brewer's Edge II Thermostat
MicroMatic Primary Single Gauge
MicroMatic "D" System Coupler
MicroMatic 12" Stainless Flush Drip Tray
Dayton Blower -
Most likely. What gauge wire did you use? As long as it is 16ga or better you should be fine.Malt is the soul of beer... and yeast gives it life..
but the kiss of the hop is the vitality of that life!
My three favorite beers: The one I just had, the one I'm drinking now and the next one I'll have.
http://kegerator-social-network.micr...bygrouptherapy -
I think it is a 12 gauge. It is a replacement lamp cord that i picked up at the Depot.Originally posted by psychodad View PostAVANTI BD6000 MOD's
MicroMatic Tower with Faucet
MicroMatic Stainless Faucet
Brewer's Edge II Thermostat
MicroMatic Primary Single Gauge
MicroMatic "D" System Coupler
MicroMatic 12" Stainless Flush Drip Tray
Dayton BlowerComment
-
Lamp cord is typically 16 or 18 gauge. I'd bet you have 16 gauge which should be fine.Malt is the soul of beer... and yeast gives it life..
but the kiss of the hop is the vitality of that life!
My three favorite beers: The one I just had, the one I'm drinking now and the next one I'll have.
http://kegerator-social-network.micr...bygrouptherapyComment
Comment