Sorry wrong section.
Announcement
Collapse
No announcement yet.
Coupler problem? Gas = No beer / No gas = beer
Collapse
This topic is closed.
X
X
-
I posted in the wrong section but thanks for the quick reply. I believe I have them hooked up correctly because at first it worked like it should except a ton of foam. Like a bonehead though I forgot to turn on my bottle and when I did I more than likely over pressurized the keg. I then let the pressure out by dispensing beer until no more came out. Now when I open the gas valve, while set to zero, and slowly open my regulator to approx 10 psi I hear the gas bubbling through the beer. Then when I dispense it ends up just being CO2.
Comment
Comment