I am installing a 3 tower beer system with Wall mount towers 7.5 lbs built in restriction running 5/16 tubing at 38*F cooler Tower 1 has a total length of 58' 12'lift and 6'drop. Tower 2 has a total length of 52' with 12' lift and 6' drop. Tower 3 has a total length of 28' with 11'lift and 5'drop. System is on a gas blender. All towers are running off same keg and reg. What should my applied pressure be and how much restriction per tower?
Announcement
Collapse
No announcement yet.
balancing check
Collapse
X
-
Mdartado, welcome to the forum. I recommend you check the Micro-matic website for restriction value posted on the spec sheets for each trunk line. Work up your restriction and I am sure we will validate your information. If you are a draft system installation company, recommend you go to the Micro-Matic draft tech school.
Good luck!
Comment