Announcement

Collapse
No announcement yet.

Another FOB Question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Another FOB Question

    Boy these things are never ending source of questions from me....When using Micromatics FD-1 stainless FOB with 5/16 barrier tubing do you need to change the barb fitting? I am pretty sure it is set up for 3/8". Do I use a short piece of 3/8" then splice it? Can the fitting be changed? Let me know what your thoughts are. Thanks!

    Ed
    Ed
    Blue Line Draft Systems
    www.bluelinedraft.com

  • #2
    I don't believe the barb fitting can be changed as that would have to be done at the *******. So, I just use the short 3/8" piece to step down.

    Comment


    • #3
      Ed,

      Another option would be to position the FOB between the coupler and the wall bracket using the 3/8" jumper line. Be certain to clamp past the barbs on the tailpiece.
      Scott Zuhse, Instructor Micro Matic Dispense Institute

      Comment

      Working...
      X