Announcement

Collapse
No announcement yet.

Beer Pump (Flojet) line restriction

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Beer Pump (Flojet) line restriction

    Hi,

    Im just finalising a design for a 20 Tap install using Flojet beer pumps to push the beer. I noticed in the Micromatic Flojet specs it states that the system should be heavily restricted due to the high pressure available from the pump. My question is, How much line restriction?

    The system will be running through a trunk, then a plate chiller then to the taps through a flooded font. Glycol will be at 28f, beer at 34f (in coolroom), pump pressure is said to be around 15psi as a starting point. CO2 keg top-up will be around 14psi. I have around 20ft between the coolroom and the font and was looking at using 1/4" ID line from pump to font. Can anyone confirm any numbers? I will also be dropping down to 3/16" in the font, this length can be adjusted up to around 4ft.

    Any help appreciated.

    Cheers,

    Fil

  • #2
    Hey, Do you know what the restriction value of the font is?

    Comment

    Working...
    X