Beer Check With Adapter

Product Images

Beer Check w/ Adapter


Beer Check with Adapter

Beer Check was designed to help breweries, distributors, installers and on-premise users determine the quality and mixture of gases used to dispense beer. There are three modes of operation on the Beer Check. The first mode (CO2 in N2) will read the mixture percentage of Co2 and nitrogen when mixed together. The second mode will read the percentage of CO2 in Air when flushing a keg after cleaning. The third mode reads the amount of oxygen in the output of a nitrogen generator.


  • Analyze the percentage of CO2 in nitrogen. Accuracy+1.0%
  • Analyze the percentage of CO2 in air. Accuracy+1.0%
  • Analyze the oxygen percentage in nitrogen. Accuracy +0.5%
  • Check the accuracy of gas blenders and premixed gas cylinders
  • Brewers can check for CO2 after purging air from kegs
  • Check the efficiency of nitrogen generators and the purity of nitrogen supplies
  • Beer Check is unique in being able to sense any gas. Most electronic leak detectors can only sense specific gases like CO2 or refrigerants. Accuracy: able to locate leaks down to .2 scfh (cubic feet per hour at standard conditions) or less


Dimensions3"W x 6"H x 1.71"D
Weight12 ounces
CaseBlack ABS plastic
BatteryCylindrical Lithium Iron Phosphate Rechargeable Cell: 3.2V 1500 mAh, 8.4A
Measured Concentration Ranges:
CO2 in Nitrogen0% to 100% CO2
CO2 in Air0% to 100% CO2
Nitrogen Generator0% to 100% O2
Operating Temperature60°F to 122°F
Input Gas Flow RateUse a flow rate of 1 LPM (liters per minute) when sampling
Sampling FrequencyContinuous
VentsUnit vents through the top vent port
Customer Reviews

Stock: Low Stock