Beer Hose Assembly - 3/16" I.D. Vinyl x 5' Long With Stainless Steel Tail Piece

Beer Hose Assembly

Description

Stainless Steel Tail Pieces for the best in product purity. 3/16" I.D. vinyl tubing is used for the beer hose in most applications where the distance between the keg and the faucet is less than 5’. The small I.D. (inside diameter) provides the correct restriction to the beer flow balancing against the pressure applied to the keg. This size hose is not appropriate for use in lengths longer then 5' as a higher then normal keg pressure would be required to dispense the beer and this would result in over carbonated (foamy) beer. This brewery approved hose will not rot, swell, or dry out and is unaffected by normal beer line cleaning chemicals.

Note: Order hose clamp separately. Item 705W or SNP—8.

FAQs

What is restriction?

Choose stainless steel for the ultimate in purity!

Specifications

ColorClear
I.D.3/16"
O.D.7/16"
Length5'
Tail Piece304 Stainless Steel
Connection FittingHex Nut with 7/8"-14 Threads (U.S. Beer Industry Standard)
Misc.759 Neoprene washer included
Max Temperature140 degrees
Customer Reviews

Average Rating:


Product Quality
Ease of Use
Cost-Benefit
Customer Service
Overall
Good stuff
By Ronnie from Atlanta GA on Monday, November 26, 2007
1 out of 1 found this review helpful
Great for short applications, as they mention you cant really use it in commercial systems because of the pressure issues.....

Was this review helpful to you?