Pro-Line™ Kegerator Beer Dispenser - (1) 1/2 Keg - 36-3/4" - Stainless Steel

Micro Matic set out to engineer and manufacture the highest quality refrigeration products in the bar and beverage industry – and we've done it. We brought together the best of the draft beer industry, refrigeration experts, and on-premise users to deliver on our promise of quality, performance, and value. Customizable, energy-efficient, and loaded with functional features, every unit is built to last.

Whether you operate a bar, cafe, or facilitate special events, this direct draw dispenser is an excellent way to add cold draft beer or any other beverage without investing in a full built-in draft system. Equipped with an integrated glass rinser, this conditions the glass before pouring—wetting and chilling for an easier pour. The unit accommodates up to (1) 1/2 keg barrel, including a draft tower and faucet. Tapping kit NOT included.

FEATURES

• Durable stainless steel exterior for a sleek look
• (1) 3" diameter polished stainless steel draft tower, (1) faucet
• Heavy-duty stainless steel top
• Drip tray with removable grill for easy cleaning
• Integrated glass rinser – helps condition the glass before pouring
• Self-closing door with key lock
• Integrated LED interior lighting
• Optional commercial-grade casters for easy mobility
• Balanced refrigeration system designed to operate at 36–38˚F
• Digital thermostat
• Front breathing for cooling and exhaust
• Reinforced stainless steel interior floor
• The dunnage rack protects the interior floor, allows for easy keg sliding, and more efficient keg cooling
• Space-saving side-mounted evaporator optimizes interior cabinet space
• Built-in blower continually cools the tower to ensure cold beverages
• R290 ozone-friendly refrigerant
• Rear knock-out plug for gas line to help ensure easy mounting of CO2 cylinder outside of unit if preferred
• Modify to dispense multiple beverages: beer, wine, nitro cold brew, kombucha

NOTE: Tapping equipment is not included. Order separately. Dispensing from more than 1 keg will require changing the tower to one or more faucets or using a tower adapter.

RINSER WATER INLET INSTALLATION

• Always check local plumbing codes first
• Install an in-line water regulator set at 15 PSI from the street water supply
• Install a shutoff rinser on the water supply

PLEASE READ: It is recommended a licensed plumber connect the glass rinser to the water supply line. Always use an in-line shut-off and water pressure regulator. Micro Matic shall not be held liable for damage caused by improper installation.

WARRANTY: Units purchased after January 1, 2018: Three (3) years parts and labor, an additional two (2) years on the compressor (parts only). Units sold before December 31, 2017: One year parts and labor, an additional four years on the compressor (parts only). All warranty work is handled through Micro Matic certified service agents.