D System - Keg Coupler - Tap w/ White Lever Handle

D System - Keg Coupler - Tap w/ White Lever Handle

D System - White Lever Handle


"D" system is the most common system available in the US, also known as American Sankey. It is used by all the major breweries - Anheuser-Busch, Miller, Molson-Coors, and Labatt as well as most craft breweries. Visit our beer system listing for an expanded listing of beers that use the "D" system valve.

View D System - Keg Coupler

The keg coupler connects to the keg valve, "tapping" the keg. Both the gas line from the CO2 tank / regulator and the beer hose to the beer faucet attach to the coupler.

Do all brands of beers use the same keg tapping equipment?

Beer Keg Coupler Features:
  • Chrome plated probe
  • Chrome plated forged brass body

Important information regarding Prop. 65 for CA residents.


Handle ColorWhite
Handle StyleLever
Gas Port3/8" O.D. Barb (To fit 5/16" I.D. Gas Hose)
Beer Port7/8"-14 Thread (U.S. Beer Industry Standard)
Customer Reviews

Replacement Parts
ItemPart #DescriptionPriceAvail.Qty 
1 FT45-113 Plastic Check Ball Retainer $1.76 In Stock
2 FT84-2DR Check Ball $1.08 In Stock
3 FT45-9 D System (American) Probe $13.16 In Stock
4 FT40-15 Coupler Probe Washer $1.08 In Stock
5 FT84-2J Coupler Gas Shut Off O-Ring $1.62 In Stock
6 FT45-2A Yoke Bolt $2.77 In Stock
7 FT49-8A Lever Handle Assy-White Short $14.18 In Stock
8 FT84-2A Sankey Tap Bottom Seal $1.42 In Stock
9 752 Thomas Vent Check Valve $1.42 In Stock
10 FT86-20 Check Valve Retainer $1.49 In Stock
10A FT86-20A Check Valve Assy (2 piece) $1.82 In Stock
11 526E 5/16" Plated Brass Tailpiece $1.20 In Stock
12 874 Hex Nut $1.00 In Stock
13 440-19L-60 Pressure Relief Valve $7.43 In Stock