Shurflo beer pump--cleaning

[skipper]

Hey dudes, Trying to figure out how to clean a system that has the above mentioned beer pumps installed. The system is set up in a series with a jumper (two kegs per line) going to a fob and then into the (Beer Ace II) pump and finally connected to the trunk line. The pump is throwing me off. I've seen the Perlick pumps and the bypass, ect...but not these. Any advise--Thanks

[Scott Zuhse]

How are you cleaning - circulation pump or pressure pots? If this is the Shurflo Beer Ace II and it does not have a bypass, is there some other type of optional equipment on the pump you have not encountered before? Or is it just the pump?

As for the series, you will require a cleaning cup on the feeder keg couplers and depending on if you are circulating or pot cleaning, either join gas couplers with double flusher or place coupler on pot.

Scott Zuhse, Instructor Micro Matic Dispense Institute