You Are Here:  
Keg Draft Beer Learning Center
North America (change region)
+ Reply to Thread
Results 1 to 2 of 2
  1. 06-27-2006 07:01 PM #1
    darrenr
    darrenr is offline Junior Member
    Join Date
    Jun 2006
    Location
    , , .
    Posts
    3

    Default Problem with pressure escaping out of coupler

    I have an issue with a new home kegerator. Things had been working fine and I disconnected the keg coupler from the keg to move the system to my parents. When I reconnected the coupler and turned back on the CO2 I get pressure escaping out of the realease valve on the keg coupler. I have tried pulling the release to purge any excess pressure and reconnect but still same issue. I have backed the CO2 pressure all the way down, but as soon as I ease the pressure back up it immediately begins escaping out the release. Any help would be greatly appreciated.
    Reply With Quote Reply With Quote  
  2. 06-27-2006 07:10 PM #2
    darrenr
    darrenr is offline Junior Member
    Join Date
    Jun 2006
    Location
    , , .
    Posts
    3

    Default

    sorry wrong forum....will repost in correct forum
    Reply With Quote Reply With Quote  
« Previous Thread | Next Thread »

Similar Threads

  1. Keg Pressure/Carbonation Pressure/Beer Type
    By avdude in forum Trouble Shooting & Beer Quality @ Home
    Replies: 16
    Last Post: 08-28-2008, 10:45 AM
  2. Regulator Problem
    By yddraig in forum Kegerators & Kegerator Kits @ Home
    Replies: 6
    Last Post: 08-27-2006, 07:53 AM
  3. Regulator problem
    By bpiret in forum Kegerators & Kegerator Kits @ Home
    Replies: 6
    Last Post: 05-30-2006, 06:19 PM
  4. Escaping gases never satisfy...
    By craigiebase in forum Trouble Shooting & Beer Quality @ Home
    Replies: 8
    Last Post: 01-17-2006, 12:10 PM
  5. Yet another foam problem.....
    By Brad in forum Trouble Shooting & Beer Quality @ Home
    Replies: 0
    Last Post: 07-25-2005, 09:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Note:
Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions. While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information. Micro Matic reserves the right to monitor, remove or edit content at its discretion.