Beer Forum

Search Forum                       Advanced Search

  #1 (permalink)  
Old 08-10-2009, 08:58 AM
Mirko_S Mirko_S is offline
Member
 
Join Date: Dec 2008
Posts: 45
Default Cloudy last pint

I just finished 1/2 of Lagunitas IPA and the very last pint I poured was cloudy as if something was floating at the top of the beer in the keg. It tasted ok but it just looked too weird and I dumped it. Anyone else have this experience?
Reply With Quote
  #2 (permalink)  
Old 08-10-2009, 10:57 AM
edramshaw edramshaw is offline
Super Moderator
 
Join Date: Feb 2006
Location: Concord, NH
Posts: 699
Default

First off lets praise your beer tastes. Great beer you're drinking there. Second I would would say that pretty normal. The keg is dispensed from the bottom so when that last beers comes up it can stir up some of the sediment from the bottom of the keg. Some excessively (I mean that in the best possible way) hopped beers will appear to be a tad cloudy and over time these proteins (or whatever they are) will settle out and gather on the bottom of the keg. This is the same for keg conditioned beers, the secondary fermentation used to carbonate the beer will produce yeast which will settle down there too when they are done. Also, as the keg gets lower people tend to check it more often. Perhaps the kegs was disturbed slightly and that caused the yeast/sediment to remix with the beer.
__________________
Ed
Blue Line Draft Systems
www.bluelinedraft.com
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 08:13 AM.

Note:
Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions. While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information. Micro Matic reserves the right to monitor, remove or edit content at its discretion.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.0.0 RC6 © 2006, Crawlability, Inc.