You Are Here:  
Keg Draft Beer Learning Center
North America (change region)
+ Reply to Thread
Results 1 to 2 of 2
  1. 04-21-2006 04:52 PM #1
    stutcher
    stutcher is offline Junior Member
    Join Date
    Mar 2005
    Location
    , , .
    Posts
    9

    Default Beer line 'yellowing'

    Will flushing beer line with blc remove the yellow coloring that occurs over time? Thank you.
    Reply With Quote Reply With Quote  
  2. 04-22-2006 01:43 PM #2
    Scott Zuhse
    Scott Zuhse is offline Administrator
    Join Date
    Mar 2005
    Posts
    2,312

    Default

    If this is vinyl line, probably not. The discoloring has probably permeated into the line itself. As long as there is not an off taste, you should be ok. Otherwise, change the line.

    Scott Zuhse, Instructor Micro Matic Dispense Institute
    Reply With Quote Reply With Quote  
« Previous Thread | Next Thread »

Similar Threads

  1. Converting a Marguerita line to a beer line
    By TAPMAN in forum Trouble Shooting & Beer Quality
    Replies: 5
    Last Post: 05-23-2006, 08:19 AM
  2. Changing Beer Line
    By lika1 in forum Trouble Shooting & Beer Quality @ Home
    Replies: 5
    Last Post: 03-09-2006, 08:17 PM
  3. Air bubble in beer line
    By Beaver in forum Trouble Shooting & Beer Quality @ Home
    Replies: 24
    Last Post: 02-15-2006, 04:07 PM
  4. Beer line length
    By psychodad in forum Trouble Shooting & Beer Quality @ Home
    Replies: 1
    Last Post: 02-11-2006, 03:35 PM
  5. Beer Line 3/16 or 1/4
    By Jayman in forum Kegerators & Kegerator Kits @ Home
    Replies: 5
    Last Post: 09-01-2005, 10:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Note:
Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions. While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information. Micro Matic reserves the right to monitor, remove or edit content at its discretion.