Beer Forum

Search Forum                       Advanced Search

  #1 (permalink)  
Old 12-22-2008, 11:54 AM
wangdango wangdango is offline
Member
 
Join Date: Dec 2008
Posts: 12
Default 1/2 keg of Harp?

Hello,
just about ready to pick up a half of Harp. My ref temp is about 32 degrees, and my last keg was pouring out at a temp of 38 degrees (Coors original). What sort of pressure would be good for the Harp? I am about 241 feet above sea level. My CO2 tank (aluminum, 5 lb, in the ref) is reading 38 psi. Do I have enough left to do a few (2 or more), kegs? THanks
Reply With Quote
  #2 (permalink)  
Old 12-22-2008, 02:19 PM
cubby_swans's Avatar
cubby_swans cubby_swans is offline
Super Moderator
 
Join Date: Nov 2007
Location: St. Louis, MO
Posts: 1,809
Default

Your co2 tank is reading 38PSI? I will need to see a picture of a guage accurate enough that you can read it accurately enough to know your tank is has 38PSI left in it. A full tank is between 900 and 1100PSI when full, and the guage that shows how much is left in your tank is the left hand guage, in this product. Each tick mark is 100PSI, and about a millimeter apart from each other. So IF you actually have 38PSI left in your tank, then no, you don't have enough gas to dispense a keg, but I'm guessing you're reading it wrong, or reading the wrong thing. How many kegs have you run off that 5lb co2 tank? You should expect 8 or 9 altogether.

http://www.micromatic.com/draft-keg-...s-pid-842.html
__________________
____________________________________________
Sometimes when I reflect back on all the beer I drink I feel ashamed.
Then I look into the glass and think about the workers in the brewery
and all of their hopes and dreams. If I didn't drink this beer, they might
be out of work and their dreams would be shattered. Then I say to myself,
"It is better that I drink this beer and let their dreams come true than
be selfish and worry about my liver."

____________________________________________
Reply With Quote
  #3 (permalink)  
Old 12-22-2008, 05:06 PM
Scott Zuhse Scott Zuhse is offline
Administrator
 
Join Date: Mar 2005
Posts: 2,108
Default

Once you figure out the 38 PSI deal, set your Harp pressure at 12 PSIG to the keg. Harp is a 2.4 volume beer and requires this pressure at 38F beer temperature.
__________________
Scott Zuhse, Instructor Micro Matic Dispense Institute
Reply With Quote
  #4 (permalink)  
Old 12-22-2008, 05:07 PM
wangdango wangdango is offline
Member
 
Join Date: Dec 2008
Posts: 12
Default

was looking at the outside #'s, inside # reads 500psi. have only run one keg thru it, BUT, some idiot thought it was funny to open up the valve when the tank was not hooked to the keg...... so, a lot of CO2 was wasted!
Reply With Quote
  #5 (permalink)  
Old 12-22-2008, 05:10 PM
Scott Zuhse Scott Zuhse is offline
Administrator
 
Join Date: Mar 2005
Posts: 2,108
Default

Is the cylinder inside the kegerator?
__________________
Scott Zuhse, Instructor Micro Matic Dispense Institute
Reply With Quote
  #6 (permalink)  
Old 12-23-2008, 08:39 AM
wangdango wangdango is offline
Member
 
Join Date: Dec 2008
Posts: 12
Default

Yes,
my CO2 tank is inside the ref (its brand new, and aluminum), didnt want to drill any more holes in the ref, is this ok?
Reply With Quote
  #7 (permalink)  
Old 12-23-2008, 09:02 PM
cubby_swans's Avatar
cubby_swans cubby_swans is offline
Super Moderator
 
Join Date: Nov 2007
Location: St. Louis, MO
Posts: 1,809
Default

500psi is a pretty normal reading when the co2 tank is inside the fridge. Keeping the co2 in the fridge is fine. I think keeping the co2 outside the unit is probably the minority. The tank pressure guage doesn't drop gradually, as co2 is used. It remains static until you're near the end of the tank. It will drop rapidly, when the gas is nearly gone.

The co2 tank guage is measuring the co2 gas pressure inside the tank, but there is also liquid co2 in there. As you use the gas, the liquid co2 evaporates into more gas. When the liquid co2 runs out, the tank guage will begin to drop rapidly. But you can still expect quite a bit of beer poured once that guage starts to drop. When mine began to drop, I still dispensed the remainder of quite a bit of a keg, and there was still a bit of gas left when that keg was dry.

Since you had some gas dispensed and you're not sure how much, what I would do is to just continually monitor that guage. I glance at mine at least once a day out of habit. When you see it begin to drop, don't panic, just refill your co2 at your earliest convenience. You should have several days worth of gas left, at least, (unless you're throwing a party)
__________________
____________________________________________
Sometimes when I reflect back on all the beer I drink I feel ashamed.
Then I look into the glass and think about the workers in the brewery
and all of their hopes and dreams. If I didn't drink this beer, they might
be out of work and their dreams would be shattered. Then I say to myself,
"It is better that I drink this beer and let their dreams come true than
be selfish and worry about my liver."

____________________________________________

Last edited by cubby_swans; 12-23-2008 at 09:05 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 08:55 PM.

Note:
Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions. While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information. Micro Matic reserves the right to monitor, remove or edit content at its discretion.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.0.0 RC6 © 2006, Crawlability, Inc.