Not drawing beer at all.

[BigB3466]

I have had my kegerator for about a year. So far no problems until the last few weeks. Last 1/2 barrel was a ton of foam I changed the washer behind the spigot. It cleared the problem perfectly. I changed the keg out two days ago and not I can't draw beer at all. All the line does is pull foam and that's only when I increase the CO2 pressure. The lines never fill with beer. Need serious help!!!!

[MMNERSM]

I assume by now you have resolved your problem. It sounds like the check ball on the coupler may have been stuck. Make sure you are cleaning your system on a regular bases. Take the time to clean your home system after each keg. Use beer line cleaning solution cleaning the line,coupler and faucet. Make sure you flush the line and rinse the faucet and coupler with water. This will ensure you have a good clean draft beer system.