Beer Forum

Search Forum Show Threads Show Posts Advanced Search

		Keg Beer Dispensing Discussion Forum - Kegerator > @Home Beer Dispensing - Kegerator & Party Events (Residential) > Trouble Shooting & Beer Quality @ Home
faucet flow problem

LinkBack

Thread Tools

Display Modes

#1 (permalink)

11-06-2009, 02:30 PM

leebo 66

Junior Member

Join Date: Nov 2009

Posts: 1

faucet flow problem

new to this. i'm on my 3rd keg, disassembled & cleaned system couple of times. my problem is : about halfway into my pour the flow pattern "flattens" out, making the stream faster, hence foam.i took apart the faucet & checked, seems to be ok.if i shut off and open back up it corrects the flow , but that does not seem right. my 1st & 2nd keg flowed smooth. any input would help. sounds like i might need to upgrade to a perlik? thanks

Last edited by leebo 66; 11-08-2009 at 09:01 AM.

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

All times are GMT -7. The time now is 09:34 PM.

Note:

Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions. While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information. Micro Matic reserves the right to monitor, remove or edit content at its discretion.