You Are Here:  
Keg Draft Beer Learning Center
North America (change region)
+ Reply to Thread
Results 1 to 2 of 2

Thread: Magic Chef mini

  1. 10-30-2009 03:26 PM #1
    Beerdrinker35
    Beerdrinker35 is offline Member
    Join Date
    Oct 2009
    Posts
    9

    Question Magic Chef mini

    I am a newbie when it comes to home brews. I have always wanted a home bar so I decided it is now or never. I have a mini fridge and want to use it to make my kegerator. I then want to install it into the home bar I am going to build. I plan on putting a 1/6 keg in the kegerator which I believe measures around 23"h x 11"d. That should fit if I measured correctly inside the mini fridge. I plan on moving the freezer component to the back wall after reading some other posts. After installing the fan, the hoses, and c02 lines I hope to have draught beer!!! Am I tackling to much at once?
    Reply With Quote Reply With Quote  
  2. 10-30-2009 05:16 PM #2
    pvs6
    pvs6 is offline Senior Member
    Join Date
    Sep 2009
    Location
    Iowa
    Posts
    167

    Default

    Quote Originally Posted by Beerdrinker35 View Post
    I am a newbie when it comes to home brews. I have always wanted a home bar so I decided it is now or never. I have a mini fridge and want to use it to make my kegerator. I then want to install it into the home bar I am going to build. I plan on putting a 1/6 keg in the kegerator which I believe measures around 23"h x 11"d. That should fit if I measured correctly inside the mini fridge. I plan on moving the freezer component to the back wall after reading some other posts. After installing the fan, the hoses, and c02 lines I hope to have draught beer!!! Am I tackling to much at once?
    Not if you're up to it, sounds like a fun project to me with the end result being quite useful.
    Reply With Quote Reply With Quote  
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Note:
Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions. While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information. Micro Matic reserves the right to monitor, remove or edit content at its discretion.