your kegerator probably uses a 3/16" id beer line. If I was you, pull off the line going from the coupler to the tower, measure the length and "id" (inside diameter)and order a new one from MM. click on the blue highlight on the upper left,it will take you to the site and click on shop. they sell the hose for .70 per foot. they have cleaning kits also. a tip on the hose, you may want to get one a foot longer than the one you now have, this controls the flow from the faucet. if the suds run slow at the proper psi, you can cut it back a bit for a faster flow of beer.
"So many great beers, so little time, and only one liver" Mark
|
Toll Free Orders:
1 (866) 291-5756
I bought a old Beverage-Air;Need Help
Linear Mode
