Find Local System Installers     Find Local Beer Line Cleaner     Buy Beer Equipment

Beer Forum

Search Forum                       Advanced Search

  #1 (permalink)  
Old 05-25-2008, 07:53 PM
tball34 tball34 is offline
Junior Member
  
Join Date: May 2008
Posts: 1
Default foamy beer
I just recieved a danby kegerator for my birthday. It was used but only had a half keg ran through it. I followed all the directions hooking it up and have the temp set at 39, and the psi at about 11, and I am runnign bud light, but i am getting alot of foam when i puor about half the glass is foam. I would appreciate any help/advice.


travas
Reply With Quote
  #2 (permalink)  
Old 05-25-2008, 09:34 PM
jerm74 jerm74 is offline
Member
  
Join Date: Jan 2008
Location: Folsom CA
Posts: 33
Default
I believe you just asked the same question that many people have asked hundreds of times.

Try the "search link" box above you will find the answers you are looking for
Reply With Quote
  #3 (permalink)  
Old 05-27-2008, 09:40 AM
cubby_swans cubby_swans is offline
Super Moderator
  
Join Date: Nov 2007
Location: St. Louis, MO
Posts: 794
Default
Quote:
Originally Posted by jerm74 View Post
I believe you just asked the same question that many people have asked hundreds of times.

Try the "search link" box above you will find the answers you are looking for
Yeah, do a search on Danby mods or Danby modifications. You may have your Danby set to 39, but the odds are HIGHLY aghainst the temperature being 39. Set it to 36, and you may actualy get the temp down to 42 or so.
__________________
____________________________________________
Sometimes when I reflect back on all the beer I drink I feel ashamed.
Then I look into the glass and think about the workers in the brewery
and all of their hopes and dreams. If I didn't drink this beer, they might
be out of work and their dreams would be shattered. Then I say to myself,
"It is better that I drink this beer and let their dreams come true than
be selfish and worry about my liver."
____________________________________________
Reply With Quote
  #4 (permalink)  
Old 05-27-2008, 11:56 AM
monkey710 monkey710 is offline
Senior Member
  
Join Date: Feb 2008
Posts: 155
Default
Not only that, but your pressure is too low.
Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 01:15 PM.

Note:
Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions. While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information. Micro Matic reserves the right to monitor, remove or edit content at its discretion.


Contact Us - MicroMatic.com - Archive - Privacy Statement - Top
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.0.0 RC6 © 2006, Crawlability, Inc.