11-27-2005, 12:49 PM
|
|
Junior Member
|
|
Join Date: Nov 2005
Location: , , USA.
Posts: 3
|
|
guinness jets of foam
I have kegerator with guiness setup & learning how to set up - connected new keg @ 25lb and poured 4 perfect Guiness and then !! high pressure "jets" of foam from faucet - cleaned restrictor plate - went up in pressure and down - no change still jets of foam - line from keg has no bubbles - temp is 32 to 37 - gas is 25/75 nit - any suggestions
dan boyer
|
12-01-2005, 08:00 PM
|
|
Junior Member
|
|
Join Date: Nov 2005
Location: , , USA.
Posts: 3
|
|
Other replies mentioned good smooth connections so I re-taped the keg - and checked all connection for smooth gaskets and rough edges - FOUND damaged washer between faucet and tower connection - I replaced and set nit/co2 to 37 lb and have perfect Guinness danb
|
12-05-2005, 07:46 PM
|
|
Super Moderator
|
|
Join Date: Mar 2005
Posts: 1,643
|
|
How can you possibly have a such a wide swing in your temperature? Try to target 38 F and your system will be more consistent.
Scott Zuhse, Instructor Micro Matic Dispense Institute
|
12-09-2005, 05:13 PM
|
|
Junior Member
|
|
Join Date: Nov 2005
Location: , , USA.
Posts: 3
|
|
I improved the method of temp recording with water and digital thermoter and found temp higher than expected - adjusted and now holding even 38 to 38.5 degrees - Guinness has improved
danb
|
12-09-2005, 10:54 PM
|
|
Super Moderator
|
|
Join Date: Mar 2005
Posts: 1,643
|
|
Temperature is [u] KING!</u>
Scott Zuhse, Instructor Micro Matic Dispense Institute
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
Similar Threads
|
| Thread |
Thread Starter |
Forum |
Replies |
Last Post |
|
Guinness at 38°
|
Jayman |
Trouble Shooting & Beer Quality @ Home |
4 |
03-21-2006 08:51 PM |
|
More Guinness Foam
|
Rockytop |
Trouble Shooting & Beer Quality @ Home |
6 |
07-23-2005 10:15 PM |
|
Guinness foam
|
jim |
Trouble Shooting & Beer Quality @ Home |
5 |
07-01-2005 12:59 AM |
All times are GMT -7. The time now is 01:19 PM.
Note:
Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions.
While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information.
Micro Matic reserves the right to monitor, remove or edit content at its discretion.
|
|
|
Toll Free Orders:
1 (866) 291-5756
