You Are Here:  
Keg Draft Beer Learning Center
North America (change region)
+ Reply to Thread
Results 1 to 2 of 2
  1. 11-12-2005 09:11 AM #1
    redswildman
    redswildman is offline Junior Member
    Join Date
    Nov 2005
    Location
    , , .
    Posts
    1

    Default 3/16 beer line (clear type)

    How long should the beer line be? does it make a difference in the beer line is looped?
    Reply With Quote Reply With Quote  
  2. 11-12-2005 11:11 AM #2
    USMC - Retired
    USMC - Retired is offline Senior Member
    Join Date
    Oct 2005
    Location
    , , USA.
    Posts
    257

    Default

    At a minimum five feet, I have a loop in mine and it has no ill effect, just make sure you dont loop it too tight and crimp the line.

    Semper Fi,
    The Gunns

    "Beer is proof that god loves us and wants us to be happy" - Benjamin Franklin
    Reply With Quote Reply With Quote  
« Previous Thread | Next Thread »

Similar Threads

  1. Keg Pressure/Carbonation Pressure/Beer Type
    By avdude in forum Trouble Shooting & Beer Quality @ Home
    Replies: 16
    Last Post: 08-28-2008, 10:45 AM
  2. Frozen Beer Line
    By frankle in forum Trouble Shooting & Beer Quality
    Replies: 4
    Last Post: 06-26-2006, 07:16 PM
  3. Converting a Marguerita line to a beer line
    By TAPMAN in forum Trouble Shooting & Beer Quality
    Replies: 5
    Last Post: 05-23-2006, 08:19 AM
  4. Beer Line 3/16 or 1/4
    By Jayman in forum Kegerators & Kegerator Kits @ Home
    Replies: 5
    Last Post: 09-01-2005, 10:41 PM
  5. A-type coupler too tall for Danby
    By Vern in forum Kegerators & Kegerator Kits @ Home
    Replies: 2
    Last Post: 08-09-2005, 07:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Note:
Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions. While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information. Micro Matic reserves the right to monitor, remove or edit content at its discretion.