Find Local System Installers     Find Local Beer Line Cleaner     Buy Beer Equipment

Beer Forum

Search Forum                       Advanced Search

  #1 (permalink)  
Old 12-13-2007, 07:55 PM
dinger23 dinger23 is offline
Junior Member
  
Join Date: Nov 2007
Posts: 3
Default Just tapped my 1st keg
well maybe about 5 beers ago. I'm a Coors Light guy and right now I have some foam. psi is at 12 right now. sounds like I need to be at 14. Also from reading the forum I need a longer beer line. Not to worried right now. I'll trouble shoot later.
Reply With Quote
  #2 (permalink)  
Old 12-14-2007, 03:05 AM
edramshaw edramshaw is offline
Super Moderator
  
Join Date: Feb 2006
Location: , , .
Posts: 556
Default
Check your temp too! Should be around 38.
__________________
Ed
Blue Line Draft Systems
www.bluelinedraft.com
Reply With Quote
  #3 (permalink)  
Old 12-14-2007, 06:25 AM
bard bard is offline
Senior Member
  
Join Date: Nov 2007
Posts: 171
Default
Did you let it sit for at least a few afters after placing it in the cooler before you tapped it? Depending on temp, length/diameter of line, etc. 12 could be too high. Play around and see what it likes.
Reply With Quote
  #4 (permalink)  
Old 12-18-2007, 07:18 PM
dinger23 dinger23 is offline
Junior Member
  
Join Date: Nov 2007
Posts: 3
Default
Things are going good. My pressure might be too low because after the 2nd pour I have hardly and head but the beer still taste fine.
Reply With Quote
  #5 (permalink)  
Old 12-18-2007, 08:25 PM
psychodad psychodad is offline
Super Moderator
  
Join Date: Feb 2006
Location: , , USA.
Posts: 756
Send a message via Yahoo to psychodad
Default
Enjoy these first beers, but do look into getting the system balanced. While the beer may taste fine now, the proper carbonation is needed over time for it to store well.
__________________
Malt is the soul of beer... and yeast gives it life..
but the kiss of the hop is the vitality of that life!
Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 01:05 PM.

Note:
Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions. While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information. Micro Matic reserves the right to monitor, remove or edit content at its discretion.


Contact Us - MicroMatic.com - Archive - Privacy Statement - Top
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.0.0 RC6 © 2006, Crawlability, Inc.