Beer Forum

Search Forum Show Threads Show Posts Advanced Search

		Keg Beer Dispensing Discussion Forum - Kegerator > @Home Beer Dispensing - Kegerator & Party Events (Residential) > Trouble Shooting & Beer Quality @ Home
air pockets

LinkBack

Thread Tools

Search this Thread

Display Modes

#1 (permalink)

08-09-2005, 09:27 PM

jdp938

Junior Member

Join Date: Aug 2005

Location: , , USA.

Posts: 3

air pockets

Hi I have a kegerator with a tower set-up that I purchased new off of ebay. I have the liquid temperature of the beer inside the kegerator at 38 degrees measured with an accurate thermometer and I have the pressure at 14 psi. I have 6 feet of beer line at 3/16 and I am at around 1400 ft of elevation. I currently have my first keg inside which is a half barrel of molson golden. I am experiencing problems because I have pockets of air forming at the top and bottom of the beer line. After pouring a beer I can sometime see air bubbles coming up from inside the keg into the line. What could be the causes of these problems?? Any help would be much appreciated. Thank You.

jdp

« Previous Thread | Next Thread »

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

All times are GMT -7. The time now is 09:52 AM.

Note:

Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions. While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information. Micro Matic reserves the right to monitor, remove or edit content at its discretion.