You Are Here:  
Keg Draft Beer Learning Center
North America (change region)
+ Reply to Thread
Results 1 to 2 of 2
  1. 03-25-2009 10:03 PM #1
    trappist
    trappist is offline Junior Member
    Join Date
    Jul 2007
    Posts
    2

    Default Help with Micromatic Gas Blender

    I have been having problems with the gas on my draft system, it is getting worse by the day and no one seems to be able to help, I am using a micromatic blender at 60% co2 40% nitrogen, currently nitrogen tanks empties out at a ratio of at least 5 or 6 to one. I am hemorrhaging nitrogen, I cant find any leaks, I have had the installer out many times (twice in the past two days) he cant find any leaks either. I suspect the Micromatic Gas Blender is broken, I called Micromatic last week, they said they would call mc dantum and get back to me, so far they have not, any one have any ideas? I am sick of changing nitrogen tanks.
    Reply With Quote Reply With Quote  
  2. 03-27-2009 09:51 AM #2
    happytappy
    happytappy is offline Senior Member
    Join Date
    Apr 2006
    Location
    Mid Michigan , USA.
    Posts
    119

    Default

    There is a shut off on the blender. turn it off and note the needle position on the nitrogen and CO2 regulator. Turn it on, if the regulator needle drops and stays down, there is a leak between the blender and the kegs. If the needle does not move, there is a leak at the regulator or blender.
    Happy Tappy Draft Beer Services
    Serving Mid-Michigan and beyond
    Reply With Quote Reply With Quote  
« Previous Thread | Next Thread »

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Note:
Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions. While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information. Micro Matic reserves the right to monitor, remove or edit content at its discretion.