Find Local System Installers     Find Local Beer Line Cleaner     Buy Beer Equipment

Beer Forum

Search Forum                       Advanced Search

  #1 (permalink)  
Old 03-07-2007, 08:02 PM
pqler1 pqler1 is offline
Junior Member
  
Join Date: Mar 2007
Posts: 1
Default Soda Secondary regulators
I bought 2 in line secondary regulators that were used to dispense soda. 2 questions.... Can I use them to dispense beer? Can I put the nipple and nut in one of the regulators and make it a primary regulator? Thanks.

P
Reply With Quote
  #2 (permalink)  
Old 03-08-2007, 01:17 PM
Scott Zuhse Scott Zuhse is offline
Super Moderator
  
Join Date: Mar 2005
Posts: 1,643
Thumbs down
No! Buy a primary. Those secondaries were designed to regulate a low pressure down to an even lower pressure.
__________________
Scott Zuhse, Instructor Micro Matic Dispense Institute
Reply With Quote
  #3 (permalink)  
Old 03-23-2007, 11:30 AM
gtpunch gtpunch is offline
Member
  
Join Date: Mar 2007
Location: Canada
Posts: 13
Default
Primary and secondary regulators share some parts and look pretty similar, but for $40 I wouldn't want to try and adapt one to behave like the other- 600psi is a lot of pressure to be messing with. The Micro Matic premium regulators are the best I've found.

You should be able use the soda regulators as secondary beer regulators though, you only need these to provide different pressures to multiple kegs when using one CO2 tank.
Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 11:27 AM.

Note:
Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions. While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information. Micro Matic reserves the right to monitor, remove or edit content at its discretion.


Contact Us - MicroMatic.com - Archive - Privacy Statement - Top
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.0.0 RC6 © 2006, Crawlability, Inc.