Find Local System Installers     Find Local Beer Line Cleaner     Buy Beer Equipment

Beer Forum

Search Forum                       Advanced Search

  #1 (permalink)  
Old 10-10-2009, 10:37 PM
bpace bpace is offline
Junior Member
  
Join Date: Sep 2009
Posts: 2
Default Dispenses to fast
okay, ive fiddled with my system alot, and got everything running smoothly. The internal temp of my cornies gets real low, and ive figured out all my regulators, etc.

So i decided to test with some water ( mkaing some carbed water). Im running into an issue here. The water is coming out of the tap WAY WAY WAY to fast.

Not really sure what to do here. I ahve 1/4 inch tubing which hooks up to the standard quick disconnect. THe PSI is set to 12, (will probably be at 9 when i put the beer in) I really, really am curious as to how to control the speed of the tap flow. If someone could help me out with this i would appreciate it.

Im tihnking it may be the lines, but not really sure.

i just know when i let the beer flow its going to be all foam. if there is a correct type of tubing, please send link. thanks

edit: pint glass fils in about 3 seconds.
Reply With Quote
  #2 (permalink)  
Old 10-10-2009, 11:21 PM
THE ICEMAN's Avatar
THE ICEMAN THE ICEMAN is offline
Super Moderator
  
Join Date: Dec 2007
Location: Sun Devil Country
Posts: 552
Default
More than likely it is your line size. You need to drop down to 3/16 in. line. Start with about 10 ft & cut it back as needed to get the flow you are looking for. Here's the link... http://www.micromatic.com/draft-keg-...-pid-547C.html


THE ICEMAN
__________________
My conversion >>>---->>> KILLER KEGERATOR


"Without question, the greatest invention in the history of mankind is beer. Oh, I grant you that the wheel was also a fine invention, but the wheel does not go nearly as well with pizza."
-Dave Barry-

Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 09:39 AM.

Note:
Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions. While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information. Micro Matic reserves the right to monitor, remove or edit content at its discretion.


Contact Us - MicroMatic.com - Archive - Privacy Statement - Top
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.0.0 RC6 © 2006, Crawlability, Inc.