Find Local System Installers     Find Local Beer Line Cleaner     Buy Beer Equipment

Beer Forum

Search Forum                       Advanced Search

  #1 (permalink)  
Old 04-03-2005, 01:18 PM
musmobil musmobil is offline
Junior Member
  
Join Date: Apr 2005
Location: , , USA.
Posts: 2
Default MULTIBLE TOWERS
IS IT A PROBLEM TO SUPPLY BEER TO TWO DIFFERENT LOCATIONS FROM THE SAME KEG AND REGULATOR? WHAT HAPPENS IF BOTH ARE SIMULTAINIUOSLY TAPPED?
Reply With Quote
  #2 (permalink)  
Old 04-03-2005, 08:31 PM
Scott Zuhse Scott Zuhse is offline
Super Moderator
  
Join Date: Mar 2005
Posts: 1,482
Default
This is a common practice as long as the beer lines from the individual keg is "Y'd" in the walk-in cooler. Never "T' a line downstream from the cooler. Do not exceed more than three runs from one keg under average volume and only two if high volume. Flow problems may exist if just CO2 is used. Gas blends at the correct ratio (60% CO2/40% Nitrogen - ales & lagers; 25% CO2/75% Nitrogen for stouts) using higher (22-25)pressure at keg is more successful.

Scott Zuhse, Instructor Micro Matic Dispense Institute
Reply With Quote
  #3 (permalink)  
Old 04-16-2007, 10:33 AM
dirkdertolle dirkdertolle is offline
Junior Member
  
Join Date: Apr 2007
Location: Germany / Stuttgart
Posts: 1
Default
Hi
I am Dirk from Germany
NO , this is NOT a PROBLEM.
you make a splitt in the lINE AFTER THE Keg bevor go in to the Cooler.
pressure with Gas N² ( is the Best )
wen you make 1 Tank beer in 1-2 Day make the Pressure 2,5 Bar
this is OK
wishes
Dirk
Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Insulation of Towers Larry Steinmetz Kegerators & Kegerator Kits @ Home 0 03-09-2006 10:06 AM
Tap towers without faucets? alfster73 System Components - Beer Side 1 08-01-2005 09:33 PM
Most Suitable towers/taps for dispensing PaulB System Components - Beer Side 1 07-12-2005 10:36 AM
new towers Rick Mayer System Components - Beer Side 2 04-07-2005 03:33 AM
Towers dgodfrey62 System Components - Beer Side 0 03-02-2005 03:10 PM


All times are GMT -7. The time now is 10:54 PM.

Note:
Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions. While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information. Micro Matic reserves the right to monitor, remove or edit content at its discretion.


Contact Us - MicroMatic.com - Archive - Privacy Statement - Top
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.0.0 RC6 © 2006, Crawlability, Inc.