+ Reply to Thread
Results 1 to 5 of 5
  1. #1
    woody is offline Member
    Join Date
    Jul 2009
    Location
    Leesburg VA
    Posts
    47

    Thumbs up Franken-regulator - no more party pump :-)

    Hey Ladies,

    My friend Jordan is having a party next week. Her last party was great, but MAN did it seriously stink having to pump the keg and wait while everyone else pumped the keg.

    So I took my old regulator, hooked up a 1/2 to 1/4 adapter and a 1/4 inch air compressor fitting to that. She only lives about 1/2 mile from my house, so I'm bringing my old tap, which will be hooked up to the "business end" of a party tap (the thumb operated faucet and line) and my Franken-regulator, along with my air compressor. Last night I hooked it up to the air compressor to see if it holds pressure, and despite its apparent age, it's fine.

    They'll certainly kill one keg, if not two, so using air is no prob. Saves that CO2 for the kegerator!

    Dave


  2. #2
    Kenny Z is offline Member
    Join Date
    Jul 2009
    Posts
    9

    Default Why the adapter?

    Looks like there was a 1/4 x 1/2" adapter and you added a 1/2" x 1/4" on top of that. Are the threads different or something?

  3. #3
    Scott Zuhse is offline Administrator
    Join Date
    Mar 2005
    Posts
    2,312

    Default

    They are using an air compressor to dispense the beer. The inlet on the old primary regulator was adapted to accommodate a quick disconnect fitting commonly used with air compressors.

    They were tired of pumping the picnic pump. Either way, the beer at the bottom of the keg will taste like cardboard.
    Scott Zuhse, Instructor Micro Matic Dispense Institute

  4. #4
    Kenny Z is offline Member
    Join Date
    Jul 2009
    Posts
    9

    Default CO2 is easier (and quieter) anyway

    I just meant there might be some unnecessary hardware in there. It looks like the quick disconnect might thread into the regulator body without any adapters. Either way I'd rather use a couple of dollars worth of CO2 instead of hauling a compressor, listening to a compressor, and maybe drinking oil, rust and whatever else might be in the compressor. Extra credit for ingenuity though.

  5. #5
    woody is offline Member
    Join Date
    Jul 2009
    Location
    Leesburg VA
    Posts
    47

    Default

    It actually was fine. The compressor is pretty new and I drain the condensation out of the tank every time it's used, and it's only been used to inflate a kiddie pool about 3 or 4 times and clear sawdust off my drill press a few times. It never blows anything nasty out, but that is definitely a good point.

    The compressor only fired up twice all night and it was hooked up to a 50 foot hose far away behind their air conditioner. I don't think anyone noticed it as the air conditioner was the major annoyance if you were in that part of the yard.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Note:
Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions. While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information. Micro Matic reserves the right to monitor, remove or edit content at its discretion.