Beer Forum

Search Forum                       Advanced Search

  #1 (permalink)  
Old 05-25-2009, 10:22 AM
jig-eye jig-eye is offline
Member
 
Join Date: Apr 2009
Posts: 5
Default jockey box

Thought I'd post some pictures of my jockey box I built with some info I got from reading this forum.It's made with 100 ft.3/8 tubing.The only problem I had with the coils is I had to use use a couple pieces of vinyl hose to connect with.The red hose ii a clean-out adapter.
Attached Images
File Type: jpg 008.jpg (97.8 KB, 41 views)
File Type: jpg 009.jpg (89.8 KB, 60 views)
File Type: jpg 011.jpg (90.0 KB, 38 views)
Reply With Quote
  #2 (permalink)  
Old 05-27-2009, 12:21 PM
Scott Zuhse Scott Zuhse is offline
Administrator
 
Join Date: Mar 2005
Posts: 2,110
Default

You may want to install 3/16" vinyl tubing behind the faucet shank versus the 3/8" Start with about eight feet. You will require around 35 PSIG for dispensing during your event.
__________________
Scott Zuhse, Instructor Micro Matic Dispense Institute
Reply With Quote
  #3 (permalink)  
Old 05-27-2009, 01:51 PM
jig-eye jig-eye is offline
Member
 
Join Date: Apr 2009
Posts: 5
Default

I dont mean to sound stupid,but why the 3/16 tubing,the shank is 3/16.THANKS
Reply With Quote
  #4 (permalink)  
Old 05-30-2009, 02:43 PM
shane34652 shane34652 is offline
Member
 
Join Date: Aug 2008
Location: Florida
Posts: 31
Send a message via Yahoo to shane34652
Default

you need to add restriction. the 3/8" line will have to high of flow rate and be hard to control the pour.
Reply With Quote
  #5 (permalink)  
Old 05-31-2009, 09:32 AM
jig-eye jig-eye is offline
Member
 
Join Date: Apr 2009
Posts: 5
Default

Thanks tubing ordered
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 09:49 PM.

Note:
Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions. While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information. Micro Matic reserves the right to monitor, remove or edit content at its discretion.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.0.0 RC6 © 2006, Crawlability, Inc.