+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Mosman is offline Junior Member
    Join Date
    Mar 2008
    Posts
    1

    Default Good Party Setup?



    That kit from Micromatic.

    A barrel large enough to put the whole keg in, filled to the top with ice. The keg in one of those keg cooler bags.

    Bud Light and Miller Lite would be the primary beers for parties. Nothing else.

    Does that tower tap work well or does the normal hose work better? Would I have to length or shorten the hoses any for good pours?

    There is one good review for this kit, any other feedback?

  2. #2
    jumper is offline Senior Member
    Join Date
    Feb 2008
    Posts
    243

    Default

    I've used a similar setup (home fabricated) with good results. Since the faucet is ridgidly mounted to the coupler there are no line lengths to adjust... I would assume this would work as well or better than a standard hose setup, and it certainly looks better.
    Always do sober what you said you'd do drunk. That will teach you to keep your mouth shut.

    Ernest Hemingway

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Note:
Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions. While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information. Micro Matic reserves the right to monitor, remove or edit content at its discretion.