Find Local System Installers     Find Local Beer Line Cleaner     Buy Beer Equipment

Beer Forum

Search Forum                       Advanced Search

  #1 (permalink)  
Old 02-09-2008, 05:35 AM
miboyd miboyd is offline
Junior Member
  
Join Date: Feb 2008
Location: Australia
Posts: 4
Default Tools for making jockey box?
Hey guys,

I've got a jockey box kit on the way and my own cooler. What are the best tools/drill bits to use to drill through the plastic coolers?

Here's the coolers: Techni Ice Comos Ice Boxes - WELCOME TO GLOBAL NATIONAL AUSTRALIA ( TECHNI ICE)

Thanks

miboyd
Reply With Quote
  #2 (permalink)  
Old 02-14-2008, 07:06 PM
CoreyD CoreyD is offline
Senior Member
  
Join Date: Dec 2005
Location: , , USA.
Posts: 68
Default
Get a cheap hole saw kit and match the size to the shanks.
__________________
"If you tap it, they will come."
Reply With Quote
  #3 (permalink)  
Old 02-15-2008, 06:29 AM
Crucial_25 Crucial_25 is offline
Member
  
Join Date: Jan 2008
Posts: 5
Default jockey box
I just made a jockey box a few days ago.. the same 1" hole saw that I used for my kegerator worked perfectly drilling into my coleman cooler....

a 7/8" would work as well

drill, crescent wrench and faucet wrench and away you go!

I dont know which size coil you bought but I have a 50ft. and I used 20 psi and it worked great 100 or 120 ft coils use 32-34 psi

I hope you have the same success that I had with my micromatic jockey box
Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 10:17 PM.

Note:
Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions. While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information. Micro Matic reserves the right to monitor, remove or edit content at its discretion.


Contact Us - MicroMatic.com - Archive - Privacy Statement - Top
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.0.0 RC6 © 2006, Crawlability, Inc.