Announcement

Collapse
No announcement yet.

Help with old Beer Miester 40-v

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help with old Beer Miester 40-v

    Hello All,

    I recently picked up a very used Beer Meister 40-v, in need of some work. It was free because the previous owner couldnt get it to chill and wanted it out of his house (the extras included made it worthwhile. One of the kegs has an $80 deposit.)

    I am working on trouble shooting the kegerator to find out why it does not chill. As of right now, when plugged in it does absolutely nothing. The stock 120v fan that blew over the compressor was seized, so it was removed and will be replaced with a compatible fan.

    The main part throwing me off is the wiring. It uses a 2 prong plug, that feeds into a rubber coated cylinder, which I can only assume is the controller for the compressor (the thermostat feeds into this as well).

    This controller then has a 2 prong outlet that the compressor plugs into. The relay on the compressor looks good, and then feeds the 120v fan.

    I would like to bypass the controller to turn the compressor on and verify that it still works and cools, but am worried about burning something up (i attempted to plug in the seized fan, and it arced.[​IMG] )

    Attached are some pics, can anyone please provide some help?

    IMG_1161.jpgIMG_1162.jpgIMG_1163.jpgIMG_1164.jpgIMG_1165.jpg

  • #2
    Looks like a can of worms... What was plugged into that other loose 2 prong plug?
    What I got:
    Beverage Air #BM23
    with a "Sexy" Double Faucet Tower and Celli Eurpean Faucets
    -MM Premium Double Guage Primary Regulator
    -MM Premium 2 Product Secondary Regulator
    -MM S/S Keg Couplers
    YouTube video of the goods

    Comment

    Working...
    X