Beer Forum

Search Forum                       Advanced Search

  #1 (permalink)  
Old 12-06-2006, 07:20 PM
Novagal62 Novagal62 is offline
Member
 
Join Date: Dec 2006
Posts: 5
Question Door mount or tower

If I have a door mounting kit but want to mount a tower can I use the same kit or do I have to buy a tower kit? I ask because, I would like to but the door mount value kit but I want to mount a forced air tower?
Reply With Quote
  #2 (permalink)  
Old 12-07-2006, 09:47 AM
brewski121 brewski121 is offline
Member
 
Join Date: May 2005
Location: HOBOKEN , USA.
Posts: 39
Default

All you should have to purchase is the tower. The only real difference between the two is the tap. The other componants should all be the same. Take a look at the tower kit on micromatic just to make sure that you have all the other parts and then just order a nice tower and you should be in business
Reply With Quote
  #3 (permalink)  
Old 12-07-2006, 10:41 AM
Novagal62 Novagal62 is offline
Member
 
Join Date: Dec 2006
Posts: 5
Default

Thanks brewski121! That's what I thought.
Reply With Quote
  #4 (permalink)  
Old 12-08-2006, 05:04 AM
ernestbud ernestbud is offline
Senior Member
 
Join Date: Oct 2006
Location: Tulsa. Oklahoma
Posts: 100
Default

if you use the door mount you won't need an air blower if you go with the tower you will need an air blower to get air into the tower otherwise you will get a shot of foam at the first of every pour remember the shank at the back of the faucet needs to be the coldest spot of the system
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 08:12 PM.

Note:
Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions. While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information. Micro Matic reserves the right to monitor, remove or edit content at its discretion.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.0.0 RC6 © 2006, Crawlability, Inc.