
11-13-2006, 01:08 AM
|
|
Junior Member
|
|
Join Date: Nov 2006
Posts: 1
|
|
Half KEgs
Hi,
I am about to build my first keggerrator, I just bought myself a freezer tonight, but the thing is the coils are inside freezer like racks instead of in the back. So the measurements wont fit a full keg unless I bend the coils and that could lead to some problems if not done correctly. here is what I was thinking.
1) Buy two different kinds of half kegs and stick them in there, that way I have two different types of beers and a dual keggerator.
2) bend the coils
3) i dont know
Do they sell half kegs at alot of places or are they hard to get, I dont want to build it if its not really available at alot of places. do they make only certain types of beers in half kegs, what about heineken? do they make that in half kegs or is it only american D system for half kegs.
Thanks
|

11-13-2006, 05:54 AM
|
|
Super Moderator
|
|
Join Date: Feb 2006
Location: , , USA.
Posts: 761
|
|
Is it too late to take your freezer back and get what you need? The two tap idea doesn't sound too bad although I don't know about these coils you are talking about. Are you saying that the keg will be sitting directly on top of the coils?
|

11-13-2006, 07:35 AM
|
|
Member
|
|
Join Date: Dec 2005
Location: , , USA.
Posts: 16
|
|
bluemarlin,
Kegs come in 1/6's, 1/4's, and 1/2's. I think most domestics come like that, and most imports come in 1/2's. I drink Amstel Light and that only comes in 1/2's, so I'm sure that is the way Heineken comes.
|

11-13-2006, 08:04 AM
|
|
Super Moderator
|
|
Join Date: Feb 2006
Location: , , .
Posts: 556
|
|
I would recommend against bending the coils, that will surely end you up with a broken freezer. As John said kegs come in 1/2, 1/4 and 1/6th barrel sizes. It is a common mistake to refer to a half barrel as a full keg so don't feel too bad. I am just generalizing here but typically major brewers (Bud, Coors, etc) will offer both 1/2 and 1/4 barrel kegs and microbrews will come in 1/2 and possibly 1/6 barrels. Imports are a little more unpredictable but I mostly see those in 1/2 barrels. Bottom line, you are seriously limiting you choices if you keep the fridge. If you know what you want to serve and it will be consistent, call around and find out if your brand comes in 1/4 bbl's and go nuts. I personally would shop around for a slightly bigger fridge to accommodate the full range of choices. Good luck!
|
| Thread Tools |
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 09:50 PM.
Note:
Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions.
While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information.
Micro Matic reserves the right to monitor, remove or edit content at its discretion.
|
|
|