08-08-2006, 10:30 AM
|
|
Member
|
|
Join Date: Jul 2006
Location: , , USA.
Posts: 14
|
|
Ne set up Question
What up I am new to the forum and have been reading as much as possible to minimize any trouble that might comes my way . I have just bought the Haier and already did the modification. I'm not sure what the liquid temp is. I have put a glass of water and let site over night and it freezes which means water must be 32d to freeze. My question is I have just put a Coors light Keg and have not taped it yet I put it in last night and wanted to let it sit for 24hrs to make sure all is good with the foam. What is the best PSI to run at I hear 13 to 16 wondering If any body can help. I am at sea level and the length on my lines are what ever comes with the Haier. Thanks 
|
08-08-2006, 11:03 AM
|
|
Senior Member
|
|
Join Date: Oct 2005
Location: , , USA.
Posts: 257
|
|
At 32 degrees or lower your system is too cold. You need to get your liquid temp set to at least 34 degrees and then tap your keg. Your next action should be to raise the temp on your system a hair and then go to the nearest cooking store and get you an instant read digital thermomiter...
Semper Fi,
The Gunns
"Beer is proof that god loves us and wants us to be happy" - Benjamin Franklin
Im a MicroMatic Beer Fanatic! Are you?
|
08-08-2006, 02:50 PM
|
|
Member
|
|
Join Date: Jul 2006
Location: , , USA.
Posts: 14
|
|
Thanks for the help but does anybody know what the PSI should be at ?
|
08-08-2006, 03:25 PM
|
|
Senior Member
|
|
Join Date: Oct 2005
Location: , , USA.
Posts: 257
|
|
that will depend on you liquid temp once you get it set
Semper Fi,
The Gunns
"Beer is proof that god loves us and wants us to be happy" - Benjamin Franklin
Im a MicroMatic Beer Fanatic! Are you?
|
08-08-2006, 05:44 PM
|
|
Member
|
|
Join Date: Apr 2006
Location: , , .
Posts: 56
|
|
38' is an ideal temp. stand if not start off at about 12'and if not satisfied gradually increase I have heard 16' is good for cooors but it is easier to increase co2 psi then decrease good luck if beer to cold it will not carbonate well.
|
08-08-2006, 07:33 PM
|
|
Member
|
|
Join Date: Jul 2006
Location: , , USA.
Posts: 14
|
|
Thak for all your help!! My Liquid tem is 36 d what psi would you recommend?
|
08-08-2006, 09:05 PM
|
|
Super Moderator
|
|
Join Date: Mar 2005
Posts: 1,563
|
|
If your location is in the greater Northeast and your beer temp. is 36 F, set PSIG to 13. Otherwise, 15
Scott Zuhse, Instructor Micro Matic Dispense Institute
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 11:13 AM.
Note:
Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions.
While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information.
Micro Matic reserves the right to monitor, remove or edit content at its discretion.
|
|
|
Toll Free Orders:
1 (866) 291-5756
