Find Local System Installers     Find Local Beer Line Cleaner     Buy Beer Equipment

Beer Forum

Search Forum                       Advanced Search

  #1 (permalink)  
Old 06-17-2006, 02:17 PM
tiffw7 tiffw7 is offline
Junior Member
  
Join Date: Jun 2006
Location: , , .
Posts: 1
Default CO2 Help!
I need some help with a CO2 problem. When I attach the regulator to the CO2 tank and then CO2 line to the keg, open the CO2 tank at the main valve and also at the valve on the regulator, it seems that no CO2 is coming out and the guage stays at O. Can anyone help with this? I have no idea what the problem may be!
Reply With Quote
  #2 (permalink)  
Old 06-17-2006, 05:46 PM
iceman8420 iceman8420 is offline
Member
  
Join Date: Jun 2006
Location: , , .
Posts: 21
Default
If you open the main valve with no regulator attached... does gas come out?

-Seth
Reply With Quote
  #3 (permalink)  
Old 06-18-2006, 01:32 AM
TAPMAN TAPMAN is offline
Super Moderator
  
Join Date: Mar 2006
Location: York, PA. , USA.
Posts: 209
Default
Either your tank is empty, your reg. is not functioning,the washer between the tank and the reg. may be crushed and blocking the flow to the reg. or even more simply, have you turned the adjustment screw on the regulator?
Reply With Quote
  #4 (permalink)  
Old 12-30-2006, 07:50 AM
Draught Hog Draught Hog is offline
Member
  
Join Date: Oct 2006
Location: Thunder Bay, Ontario, Canada
Posts: 7
Default
Are you sure you don't have a C02 Syphon tank with the dip tube. This would draw liquid C02 and instantly freeze in the orifice between the valve and the regulator.
Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 10:13 PM.

Note:
Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions. While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information. Micro Matic reserves the right to monitor, remove or edit content at its discretion.


Contact Us - MicroMatic.com - Archive - Privacy Statement - Top
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.0.0 RC6 © 2006, Crawlability, Inc.