03-25-2006, 02:25 PM
|
|
Junior Member
|
|
Join Date: Mar 2006
Location: , , .
Posts: 4
|
|
temp control issues
I recently converted a chest freezer into a kegerator, I purchased a temp controller (the controller II) and I am having trouble trying to programming it. any one out there who has used one of these and could shed some light on how to program it would be great. Thanks
|
03-27-2006, 03:06 PM
|
|
Super Moderator
|
|
Join Date: Mar 2005
Posts: 1,323
|
|
Was there any instructions on pushing the menu button and what each readout indicated? Normally it will ask specifics such as centigrade or fahrenheit, swing and cut out temperature. Push the menu and determine what it readout is telling you and adjust accordingly.
Scott Zuhse, Instructor Micro Matic Dispense Institute |
03-27-2006, 03:24 PM
|
|
Junior Member
|
|
Join Date: Mar 2006
Location: , , .
Posts: 4
|
|
i contacted the manufacture and they sent me a simple one page sheet of directions. I dont know why they dont include these directions with the controller. I spent all weekend trying to figure out the directions that came with it, with the simple ones i had it up and running in two mins
|
03-27-2006, 03:32 PM
|
|
Super Moderator
|
|
Join Date: Mar 2005
Posts: 1,323
|
|
Have you pushed the menu button yet?
Scott Zuhse, Instructor Micro Matic Dispense Institute |
03-27-2006, 05:08 PM
|
|
Junior Member
|
|
Join Date: Mar 2006
Location: , , .
Posts: 4
|
|
i finally figured it out with the second sheet and a call to the manufacture. it seems to be runnign fine now
thanks
|
03-27-2006, 05:08 PM
|
|
Super Moderator
|
|
Join Date: Mar 2005
Posts: 1,323
|
|
There are blocker controls that need to be maneuvered to tell the control if you want it to heat or chill. Send me an e-mail and I will reply with the actual instructions (12 pages) for this control.
Scott Zuhse, Instructor Micro Matic Dispense Institute |
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
Similar Threads
|
| Thread |
Thread Starter |
Forum |
Replies |
Last Post |
|
Yuengling head issues
|
SynergyXJ |
Trouble Shooting & Beer Quality @ Home |
1 |
09-08-2006 08:04 AM |
|
Inventory control modules
|
wineglow |
Trouble Shooting & Beer Quality |
10 |
05-21-2006 12:24 PM |
|
Air Cooled Issues
|
tony95 |
Kegerators & Kegerator Kits @ Home |
9 |
02-09-2006 06:20 PM |
All times are GMT -7. The time now is 05:06 PM.
Note:
Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions.
While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information.
Micro Matic reserves the right to monitor, remove or edit content at its discretion.
|
|
|
Toll Free Orders:
1 (866) 291-5756
