Fan stopped working.

[sandracer114]

Does anyone know how to get the fan to work again or where to get a replacement. I have an older Beverage-Air 59" 2 door model that holds up to 3 kegs. Thanks for any help. Jeff.

[cubby_swans]

Originally Posted by sandracer114

Does anyone know how to get the fan to work again or where to get a replacement. I have an older Beverage-Air 59" 2 door model that holds up to 3 kegs. Thanks for any help. Jeff.

here's a link to beverage air's site/model search page. You'll need to know the model of your unit (DD58?). Should be on a sticker or plate somewhere on the unit. Also, there's an 800 number at the top of this page to beverage air. If they can't get send you parts directly, they should be able to get you in contact with someone who can.

http://www.4emweb.com/search.asp

[BrewGuru]

Originally Posted by sandracer114

Does anyone know how to get the fan to work again or where to get a replacement. I have an older Beverage-Air 59" 2 door model that holds up to 3 kegs. Thanks for any help. Jeff.

Assuming you mean the Evaporator Fan (The one inside the unit). They are fairly easy to pull out, and it's a good opportunity to make sure everything is clean operating properly draining as expected, and that the fins on your evaporator are free of debris.

Bev-Air Part Number 501-138B

If you have an ICS account or know someone who does, M-338

There is also a Dayton model that is an exact fit and same specs you can get from a Dayton supplier, but I can't remember the part number right now. Pull yours, check the brand, and do a search on the number!

Often you can just get them to spin up with a little push in the right direction if they are starting to fail, however this means the remaining life is very short, and you really should order a replacement.
j
If you mean the Condenser Fan, let us know.

Good luck.