Beer Forum

Search Forum                       Advanced Search

  #1 (permalink)  
Old 07-17-2008, 04:37 PM
jlyjr jlyjr is offline
Junior Member
 
Join Date: Jul 2008
Posts: 3
Default bar tap

I have just finished my basement and my bar is almost complete. I want to put in a tap system in my bar. From what I have read, the typical Kegerator won't work because I want to enclose the cooling unit in the bar with an access door in the front.(Not enought air flow to cool typical unit) The under counter units are Way expensive for me!! I have found the GE space saver 6.0 cu ft fridge that, according to GE's specs can be enclosed with 0" of clearance for $288 at Lowes. Does anyone have any experience with these? Unless I am missing something, this looks like the perfect unit to convert to a cheaper under the counter kegerater. Thanks.
Reply With Quote
  #2 (permalink)  
Old 07-18-2008, 01:04 PM
jlopez77 jlopez77 is offline
Senior Member
 
Join Date: May 2008
Location: Delanco, NJ
Posts: 63
Default

You may not be able to put a keg and/or the CO2 tank inside. These fridges are not designed to be converted to kegerators. You'll need to see the fridge and measure the interior space and account for the compressor and door shelves and any other obstructions. And I not sure you can even drill through the top in these. You may hit a refridgerant line.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 12:42 AM.

Note:
Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions. While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information. Micro Matic reserves the right to monitor, remove or edit content at its discretion.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.0.0 RC6 © 2006, Crawlability, Inc.