Find Local System Installers     Find Local Beer Line Cleaner     Buy Beer Equipment

Beer Forum

Search Forum                       Advanced Search

  #1 (permalink)  
Old 05-07-2008, 10:41 AM
argis argis is offline
Junior Member
  
Join Date: May 2008
Posts: 1
Default Kegerator that hold a 1/4 of Killians
Hello all.....new here. I am building a bar and remodeling my basement around it. I am a dedicated Killians drinker and built the bar witht he intent on having a Killians kegerator. As I began this project, I started researching and I am having difficulty finding a reasonably priced/sized kegerator that will fit a Killian's keg....or so far, any kegerator that will.

Does anyone have any suggestions?
Reply With Quote
  #2 (permalink)  
Old 05-07-2008, 11:27 AM
cubby_swans cubby_swans is offline
Super Moderator
  
Join Date: Nov 2007
Location: St. Louis, MO
Posts: 794
Default
what's 'reasonably priced'? Any full sized kegerator should fit a 1/4 barrel of Killians. Danby and Nostalgia can both be had for under $500.
__________________
____________________________________________
Sometimes when I reflect back on all the beer I drink I feel ashamed.
Then I look into the glass and think about the workers in the brewery
and all of their hopes and dreams. If I didn't drink this beer, they might
be out of work and their dreams would be shattered. Then I say to myself,
"It is better that I drink this beer and let their dreams come true than
be selfish and worry about my liver."
____________________________________________
Reply With Quote
  #3 (permalink)  
Old 05-07-2008, 11:29 AM
jackstraw jackstraw is offline
Senior Member
  
Join Date: Jan 2008
Location: So. Cal.
Posts: 166
Default
Argis,

Welcome.

I would think every one of the kegerators on this page will fit a 1/4 of Killians.

http://www.micromatic.com/kegerator-cid-5.html


Here are the standard keg sizes:

http://www.micromatic.com/beer-quest...le-aid-11.html

Or you can convert a fridge or chest freezer to a kegerator and possibly fit more than one keg.
Reply With Quote
  #4 (permalink)  
Old 05-07-2008, 11:33 AM
jackstraw jackstraw is offline
Senior Member
  
Join Date: Jan 2008
Location: So. Cal.
Posts: 166
Default
The summit/sanyo is a little pricier, but is a good choice IMO.
Reply With Quote
  #5 (permalink)  
Old 05-12-2008, 07:57 PM
beer4me beer4me is offline
Member
  
Join Date: Dec 2007
Posts: 15
Default
My Danby currently has a 1/6 Killians and a 1/4 (tall) Yuengling. It's tight, but it fits.
Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 02:51 AM.

Note:
Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions. While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information. Micro Matic reserves the right to monitor, remove or edit content at its discretion.


Contact Us - MicroMatic.com - Archive - Privacy Statement - Top
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.0.0 RC6 © 2006, Crawlability, Inc.